Mitsubishi Electric GOT SIMPLE GS2110-WTBD User Manual page 188

(2) High Performance model QCPU
Parameter
Intelligent function
module parameter
Program
Device comment
Boot operation
specification file
Device initial value
File register
Sampling trace file
Failure history data
Programmable controller
user data
*1
*2
15 - 42
15.8 BACKUP/RESTORE
Item
Parameter for operating a programmable controller
Parameter for intelligent function modules
Program that the CPU operates (Including SFC program)
Device comment to be stored in a programmable controller
Batch file for starting programs stored in ROM and others
Setting the device initial value
*1
Data stored in file registers
Sampling trace data that the specified device data is
*2
continuously collected with the specified timing
*2
Failure history data that are recorded self-diagnostic results
Any user-created data stored in a memory card
The file register in the Flash card installed in the CPU is always restored without confirming saving.
Select whether restoring or not the file register stored in the SRAM card or standard RAM in the dialog box displayed when
restoration is executed.
When the file register is not restored, the existing file register is deleted.
Therefore, programs of the controller may not work normally.
If a problem occurs in the operation of the controller after restoration, perform the restoration again, including to the file register.
The item can be backed up only.
Description File name
PARAM.QPA
IPARAM.QPA
***.QPG
***.QCD
AUTOEXEC.QBT
***.QDI
***.QDR
***.QTD
***.QFD
***.*** (Optional)