9.3.3
Basic operation of settings change
■1. Change of setting value
Description
(1) Setting item, select button
Touch the select button to change the settings.
The setting methods differ depending on the setting items.
The following types of setting method are available.
(a)
Switching the setting value
The button repeats
(b)
Enter the setting value with a keyboard.
Use these keys to enter numerical values. Touch the button to display a keyboard on the GOT screen.
For the keyboard operations, refer to the next page.
(c)
Move to another setting screen.
Touch the button to move to each setting screen.
For the setting method of each setting item, refer to the setting operation of each setting screen.
(2) [ ] (Close/Return) button
Reflect or cancel the changed settings.
(a)
[ ] (Close/Return) button
Touching this button closes the screen. Depending on the setting item, the GOT restarts.
Touch the [ ] button, and then the dialog box shown below is displayed.
(If no setting is changed, the dialog is not displayed.)
Operate following the message of the dialog box.
9 - 8
9.3 Utility Display
Selection button
SHORT LONG OFF
Description
Selection button
every time it is pressed.