Power Supply Specifications - Mitsubishi Electric GOT SIMPLE GS2110-WTBD User Manual

*1 Bright dots (always lit) and dark dots (unlit) may appear on a liquid crystal display panel. It is impossible to completely avoid this
symptom, as the liquid crystal display comprises of a great number of display elements. Flickers and partial discoloration may be
generated on the liquid crystal display panel due to individual differences of panels. Please note that these phenomena appear
due to its characteristic and are not caused by product defect.
*2 The touch panel is an analog-resistive type. Simultaneous pressing of two or more areas on the touch panel may activate the
switch between those areas. Do not press two or more areas simultaneously on the touch panel.
*3 Note that this does not guarantee all users' operation environment. In addition, the product may not be used in environments
under exposition of oil or chemicals for a long period of time, or in environments filled with oil-mist.
3.3

Power Supply Specifications

Item
Input power supply voltage 24VDC (+10% -15%), ripple voltage 200mV or less
Power consumption 7.6W (317mA/24V) or less
At backlight off 3.8W (158mA/24V) or less
Inrush current 17A or less (6ms, 25°C, at the maximum load)
Permissible instantaneous
Within 5ms
power failure time
Noise immunity Conforms to IEC61000-4-4, 2kV (power supply line)
Dielectric withstand voltage 350VAC for 1 minute (across power supply terminals and earth)
Insulation resistance 500VDC across power terminals and earth, 10 MΩ or more by an insulation resistance tester
GS2110-WTBD
POINT POINT POINT
Operation at momentary power failure
The GOT continues to operate even upon 5ms or shorter instantaneous power failure.
The GOT stops operating if there is extended power failure or voltage drop, while it automatically
resumes operation as soon as the power is restored.
Specifications
GS2107-WTBD
6.5W (271mA/24V) or less
3.8W (158mA/24V) or less
3.3 Power Supply Specifications
3
3 - 3