Control Panel Temperature And Mounting Angle - Mitsubishi Electric GOT SIMPLE GS2110-WTBD User Manual

Graphic operation terminal
Hide thumbs Also See for GOT SIMPLE GS2110-WTBD:
Table of Contents

Advertisement

6.4

Control Panel Temperature and Mounting Angle

When mounting the main unit to a control panel or similar fixture, set the GOT display section as shown below.
■1. Horizontal installation
When the temperature inside the control panel is 40 to 50°C, the mounting angle should be in the range from 60 to 105
degrees.
The GOT will have a longer lifetime if used within the mounting angles shown above.
Ideally, the temperature inside the control panel should not exceed 0 to 40°C.
■2. Vertical installation
When the temperature inside the control panel is 40 to 50°C, the mounting angle should be in the range from 60 to 105
degrees.
The GOT will have a longer lifetime if used within the mounting angles shown above.
Ideally, the temperature inside the control panel should not exceed 0 to 40°C.
GOT
back panel
GOT
display
section
Control panel,
etc.
GOT
back panel
GOT
display
section
Control panel,
etc.
6.4 Control Panel Temperature and Mounting Angle
105°
60°
105°
60°
6
6 - 3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Got simple seriesGot simple gs2107-wtbd

Table of Contents