Overview - Mitsubishi Electric GOT SIMPLE GS2110-WTBD User Manual

1. OVERVIEW

■1. About GOT
A GOT is installed on the panel surface of a control panel or operating
panel and connects to the PLC within the control panel. The GOT carries
out switch operation, lamp display, data display, message display, etc.
For the display screen, two kinds of screens are available: user screen and
utility screen.
(1) User screen
The user screen is a screen drawn by drawing software.
The objects "Touch switch", "Lamp display", "Comment display", and
"Numeric display" can be arbitrarily arranged on the display.
Moreover, multiple screens created within drawing software can be
individually selected or overlapped for the display.
For details, refer to the following.
➠
(2) Utility Screen
The utility screen is a factory drawn horizontal screen that cannot be edited.
The utility screen can be displayed on the GOT by installing the standard monitor OS from drawing software or an SD
card to the GOT.
Such as [Brightness] and [Time setting] can be set from the utility screen.
For details, refer to the following.
➠
GT Designer3 (GOT2000) Help
9. to 22.
PLC
Connector for
program
GOT
1
1 - 1