12.2.4
Position correction of the touch panel (touch panel calibration setting)
■1. Touch panel calibration setting function
Touch panel reading error can be corrected.
Normally the adjustment is not required, however, the difference between a touched position and the object position
may occur as the period of use elapses.
When any difference between a touched position and the object position occurs, correct the position with this function.
Before adjustment
Run
The [Run] will operate though you
intended to touch the [Stop] button.
■2. Touch panel calibration setting display operation
Main menu
Touch
[GOT setup].
Calibration
Stop
After adjustment
Run
Stop
The [Stop] button can be touched
without fail.
GOT setup
Operation
12.2 Operation Setting (Settings for Operation)
Touch
[Operation].
Touch
[Calibration].
12 - 9
12