Advertisement
Item
GT1155-QTBD
Battery
GT11-50BAT lithium battery
Backup target
Clock data, alarm history and recipe data
Life
Approx. 5 years (Operating ambient temperature of 25°C)
RS422 1ch
Transmission speed: 115,200/57,600/38,400/19,200/9,600/4,800bps
RS-422
Connector shape
: D-sub 9-pin (Female)
Application
: PLC communication
RS232 1ch
Transmission speed : 115,200/57,600/38,400/19,200/9,600/4,800bps
RS-232
Connector shape
: D-sub 9-pin (Male)
Built-in
Application
: PLC communication, bar code reader, RFID connection, PC communication
interface
(Project data upload/download, OS installation, transparent function)
USB (Full Speed 12Mbps), device, 1ch
USB
Application: PC communication (Project data upload/download, OS installation, transparent function)
Conforming to PCMCIA, compact flash slot, 1ch
CF card
Connector shape : Dedicated for TYPE Ι
Application
: Data transfer, data storage
Buzzer output
Single tone (tone length adjustable)
Environmental protective structure
*4
Equivalent to IP67 (JEM1030) (front section) when the USB environmental protective cover is attached
W164(6.46) × H135(5.32) × D56(2.21)[mm](inch)(Excluding USB environmental protective cover) (Horizontal format)
External dimensions
Panel cutting dimensions
W153 (6.03) × H121(4.77)[mm] (inch) (Horizontal format)
Weight
0.7kg (Excluding mounting fixtures)
Compatible software package
GT Designer2 Version2 or later
*1 Bright dots (always lit) and dark dots (unlit) may appear on a liquid crystal display panel. It is impossible to completely avoid this symptom, as the liquid crystal display
comprises of a great number of display elements. Flickers may be observed depending on the display color.
Please note that these dots appear due to its characteristic and are not caused by product defect.
When the same screen is displayed for a long time, an incidental color or partial discoloration is generated on the screen due to heat damage, and it may not disappear.
To prevent heat damage, the screen saver function is effective.
For details on the screen saver function, refer to the following.
→ GT11 User's Manual
*2 Using the GOT Backlight OFF function can prolong the life of the backlight.
For details on the Backlight OFF function, refer to the following.
→ GT11 User's Manual
*3 ROM in which new data can be written without deleting the written data.
*4 Compliant with IP67 when the USB environmental protection cover is attached. Not compliant when a USB cable is connected. Note that this does not guarantee all
users' operation environment.
3.3 Power Supply Specifications
Item
GT1155-QTBD
Input power supply voltage
24VDC (+10% -15%), ripple voltage 200mV or less
Fuse (built-in, not exchangeable)
1.0A
Power consumption
9.84W (410mA/24VDC) or less
At backlight off
4.32W (180mA/24VDC) or less
Inrush current
15A or less (26.4V) 2ms
Permissible instantaneous power
Within 5ms
failure time
*1
Noise immunity
Noise voltage: 1000Vp-p, Noise width: 1µs (by noise simulator of 30 to 100Hz noise frequency)
Dielectric withstand voltage
500VAC for 1 minute (across power supply terminals and earth)
Insulation resistance
10MΩ or larger by insulation resistance tester (across power supply terminals and earth)
Applicable wire size
2
0.75 to 2[mm
]
Applicable solderless terminal
Solderless terminal for M3 screw RAV1.25-3, V2-N3A, FV2-N3A
Applicable tightening torque
0.5 to 0.8[N
m]
•
(Terminal block terminal screw)
*1 The GOT continues to operate even upon 5ms or shorter instantaneous power failure.
The GOT stops operating if there is extended power failure or voltage drop, while it automatically resumes operation as soon as the power is restored.
Specifications
GT1155-QSBD
GT1150-QLBD
Specifications
GT1155-QSBD
GT1150-QLBD
9.36W (390mA/24VDC) or less
3.4 External Dimensions
164(6.46")
22
120(4.73")
(0.87")
23(0.91")
GRAPHIC OPERATION TERMINAL
22
120(4.73")
(0.87")
152(5.99")
4. Installation
4.1 Control Panel Inside Dimensions for Mounting GOT
Mount the GOT onto the control panel while considering the following control panel
inside dimensions.
30
152(5.99")
(1.19")
CF CARD
1)
I/F
INPUT
24V DC
-
+
Unit: mm (inch)
No
Name
1)
PLC connection cable/PC connection cable
Applicable cable
Some cables may need to be longer than the specified dimensions when connecting
to the GOT. Therefore, consider the connector dimensions and bending radius of the
cable as well for installation.
GOT
1000
#4-40UNC
(Inch screw type)
M2.6
(Metric screw type)
MITSUBISHI
Panel thickness: 5mm(0.2") or less
5
4
(0.16")
(0.2")
Unit: mm (inch)
4.2 Panel Cutting Dimensions
Make holes in the panel according to the dimensions list below.
Also, ensure 10mm spaces in upper and lower parts of the panel for mounting
fixtures.
+2
+0.08"
153
(6.03"
)
-0
-0
10(0.4") or more
10(0.4") or more
Unit: mm (inch)
Advertisement
