Service Menu; Network Settings; Erase Project Memory; Load Project From Memory Card - Mitsubishi Electric E1000 Series Service And Maintenance Manual

Hardware
3.8

Service Menu

The Service Menu is accessed by setting the mode switches on the operator panel in
mode 1000.
The following options are available in the Service Menu:
3.8.1

Network Settings

Select this option to access the Network Menu.
Network Menu
The options in the Network Menu corresponds to selecting Settings/Network in
E-Designer and contains the following items:
Menu item
TCP/IP Settings 18.2 Network Communication through Ethernet
Accounts 18.5 Network Accounts
Services 18.4 Network Services
3.8.2

Erase Project Memory

This option erases the project memory.
3.8.3

Load Project from Memory Card

An empty operator panel can be started with an existing E-Designer project, used in
another panel. The project first has to be saved to a Compact Flash memory card or
USB memory stick via the function Save project to memory card (for example via a
function key).
Insert the memory card in the empty panel before boot-up. Then select Load project
from memory card in the service menu and follow the instructions.
3.8.4

Enter Transfer Mode

Allows entering transfer mode manually, needed to download projects via GSM
modem. See section Transfer via GSM Modem in E-Designer reference manual/
help file for details.
3.8.5

Enter Run Mode

Allows entering run mode manually, needed to download projects via GSM modem.
See section Transfer via GSM Modem in E-Designer reference manual/help file for
details.
3.8.6

Update System Program from Memory Card

Insert a Compact Flash or USB memory stick with a new system program and follow
the instructions. The system program can also be updated via the configuration tool
for the operator panels.
3.8.7

Calibrate Touch Screen

Follow the instructions on the screen to calibrate the touch screen.
48
Described in E-Designer reference manual/help file
Mitsubishi Electric, MA00758A