Table of Contents
Advertisement
3.2.1
Parameter clear
"Parameter clear" and "All parameter clear" can be executed. Set the PU operation mode before execution.
• Parameter clear ... The settings of parameters except for calibration parameters and terminal function selection parameters
are initialized.
• All parameter clear ... The settings of all the parameters, including calibration parameters and terminal function selection
parameters, are initialized.
3.2.2
Inverter reset
Resets the inverter.
If the inverter's protective function has been activated and the inverter has tripped (output shut-off), the inverter reset can be
executed only by pressing
The inverter reset can also be executed by turning the inverter OFF and then ON or turning ON the RES signal. (For the
details, refer to the Instruction Manual of the inverter.)
3.2.3
Terminal assignment
Displays the signals assigned to the I/O terminals of the control circuit and the ON/OFF status of the signals.
The terminal status of the plug-in option can be checked if a plug-in option FR-A8AX or FR-A8AY is installed.
34
MENU
.
Terminal assignment
RL
:
0
■
RM
:
1
□
RH
:
2
□
▼
STOP
PU
BACK
Indicates that the signal is ON.
Indicates that the signal is OFF.
Hide quick links:
Advertisement
Table of Contents
