Technical Data - Mitsubishi Electric E1041 Installation Manual

3

Technical Data

Parameter
Front panel, 155.8 x 119 x 6 mm
W x H x D
Mounting 57 mm (157 mm including clearance)
depth
Front panel IP 66
seal
Rear panel IP 20
seal
Touch Touch screen: Polyester on glass, 1 million finger touch operations.
screen Overlay: Autotex F157/F207 *.
material
Reverse side Powder-coated aluminum
material
Weight 0.6 kg
Serial port 25-pin D-sub contact, chassis-mounted female with standard locking screws
RS422/ 4-40 UNC.
RS485
Serial port 9-pin D-sub contact, male with standard locking screws 4-40 UNC.
RS232C
Ethernet Shielded RJ 45
USB Host type A (USB 1.1), max output current 500 mA
Flash 12 MB (incl. fonts)
memory for
application
Real time ±20 PPM + error because of ambient temperature and supply voltage.
Total maximum error: 1 min/month at 25 °C
clock
Temperature coefficient: 0.004 ppm/°C
Real time CR2450 (UL and cUL: Sanyo or Panasonic)
clock Minimum lifetime: 3 years
battery
Power Normal: 0.15 A
consumption Maximum: 0.35 A
at rated
voltage
Display TFT-LCD.
320 x 240 pixels, 64K colors.
LED backlight lifetime at the
ambient temperature of
+25 °C: >10,000 h.
Active area 70.1 x 52.6 mm
of display,
W x H
Fuse Internal DC fuse, 2.0 AT, 5 x 20 mm
Power +24 V DC (20 - 30 V DC). Power supply connector.
supply CE: The power supply must conform with the requirements according to IEC
60950 and IEC 61558-2-4.
UL and cUL: The power supply must conform with the requirements for class
II power supplies.
Ambient Vertical installation: 0 ° to +50 °C
temperature Horizontal installation: 0 ° to +40 °C
-20 ° to +70 °C
Storage
temperature
Mitsubishi Electric, MA00818C
E1041
2
TFT-LCD.
320 x 240 pixels, 16 greyscales.
LED backlight lifetime at the
ambient temperature of
+25 °C: >10,000 h.
Technical Data
E1043
13