Panasonic Minas E Series Instruction Manual page 53

Display of input/output signal status
The status of control input/output signal connected with connector CN X5 is displayed.
Make use of this display to check the quality of wiring and for other purposes.
•••••• Active
•••••• Inactive
Signal No. (hexadecimal number 0 - 1F)
•••••••• Input signal
•••••••• Output signal
<Remarks>
• The blinking decimal point is shifted by pressing
• Signal No. can also be changed with input/output mode as follows:
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
(The signal is active.)
(The signal is inactive.)
SHIFT
Select no. of the signal to be monitored by pressing
and .
Transition by
pressing .
.
SHIFT
(Right side of the decimal point: Signal selection mode)
(Left side of the decimal point: Input/output selection mode)
53
[Preparations]
(No. of the lowest
place of input signal)
(No. of the highest
place of input signal)
(No. of the lowest
place of output signal)
(No. of the highest
place of output signal)