Panasonic Minas E Series Instruction Manual page 185

Connector Kits for Power Supply of the Driver
(1) Part No. DV0P2870
(2) Components
Name
Connector (10P)
Connector Pin
(3) Pin arrangement of connector for CN x 1
(4) Recommended manual pressure bonding tool
(Customers are requested to provide it by
themselves.)
<Cautions>
1. The above table shows arrangement of pins viewed from the pin inserting direction of the connector.
Also check pin Nos. carved on the main body of the connector so as to avoid incorrect wiring.
2. For wiring and connection, refer to "System Configuration and Wiring", Wiring of Main Circuits (Page
27).
3. You should leave a pin labeled with (NC) unconnected.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Manufacturer's part No. Number
5557-10R-210
5556PBTL
10 9 8
L1 (NC) L2
5 4 3
P (NC) B
Manufacturer
1
Molex Incorporated
6
7 6
(NC) L3
2 1
(NC) E
Manufacturer's part No. Wire rod
57026-5000 UL1007
57027-5000 UL1015
185
[Reference]
Remarks
For connector CN X1
(pin 10)