Panasonic Minas E Series Instruction Manual page 190

Optional Parts
External Regenerative Resistor
Manufacturer's
Part No.
model name
DV0P2890
DV0P2891
Manufactured by: IWAKI MUSEN KENKYUSHO CO., LTD.
<Note>
For safety reasons, the external regenerative resistor has a built-in temperature fuse. The built-in
temperature fuse may be disconnected depending on heat dissipation conditions, range of use
temperatures, supply voltage, and load variations.
4.3
57
65
DIN Rail Mounting Unit
(1) Part No. DV0P3811
(2) Outline Dimension
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Ohmic Value Rated Power
50 Ω
45M03
100 Ω
45M03
300
4.3
Female terminal
5556PBTL
(or 5556PBT)
35
2-M4 bar ring
20
(for mounting screws)
(6)
Mounting plate
(6)
Rail stop
Specification
Operating Temperature for
Built-in Temperature Fuse
10W 130±2˚C
10W 130±2˚C
<Cautions>
The regenerative resistor may be hot.
Take preventive actions against a fire and burn.
Do not mount the regenerative resistor in the vicinity
of an inflammable object or in a place where an
operator may easily touch it by hand.
<Remarks>
• Two mounting screws (M4 x length 8, pan head
machine screws) are supplied.
• * When extended, the rail stopper is 10mm long.
<Note>
For installation and removal, refer to "Installation" of
Before Use edition on Pages 18 to 19.
190
Remarks
(Specifications for
the driver voltage)
For single-phase 100V
For single-phase/
three-phase 200V