Panasonic Minas E Series Instruction Manual page 113

(2) Check LED status.
Color of
LED Status
Green
Orange
Red
Check that alarm code LED does not flash? (It is out during normal operation).
It starts flashing in case of an alarm.
An alarm code (refer to pages 145 to 148) indicates the alarm code number
by the number of flashes of orange and red lights.
Orange: 10 digit
(Example)
When overload (alarm code No.16) occurs and the motor stops:
The orange light flashes once and red one flashes 6 times.
1 sec.
Orange
1 sec. 0.5 sec.
(3) Setting the parameter
Prepare for a personal computer and "PANATERM
(4) Enter a command that matches the control mode.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
[Connections and Settings in Internal Velocity Control Mode]
Description
The main power is turned ON. The driver is switched on.
The LED flashes (for 1 second) when a warning is issued.
(Abnormal overload, regeneration, and fan rotation speed)
Alarm output.
Red: 1 digit
0.5 sec. 0.5 sec. 0.5 sec. 0.5 sec. 0.5 sec.
Red Red Red Red
0.5 sec. 0.5 sec. 0.5 sec. 0.5 sec.
113
Red Red
After 2 seconds
0.5 sec.
".
®