Panasonic Minas E Series Instruction Manual page 13

Replacement Guidance
Parts replacement cycles depend on the actual operating conditions and how the equipment has been used.
Defective parts should be replaced or repaired immediately.
Prohibited
Equipment
Smoothing condenser
Aluminum electrolytic
capacitor on the print
board
Rush current
preventive relay
Driver
Rush current
preventive resistor
Cooling fan
Bearing
Motor Oil seal
Encoder
Speed reducer
Motor with Gear
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Dismantling for inspections or repairs should be done by our
company (or our sales agents).
Standard replacement
Part
cycles (hour)
about 5 years
about 5 years
Approx. 100,000 cycles
(The life depends on the
actual operating
conditions.)
Approx. 20,000 cycles
(The life depends on the
actual operating
conditions.)
2 to 3 years
(10,000 to 30,000 hours)
3 to 5 years
(20,000 to 30,000 hours)
5000 hours
3 to 5 years
(20,000 to 30,000 hours)
10,000 hours
The replacement cycles shown here
are just only for reference if any part
is found defective regardless of the
standard replacement cycles,
immediately replace it with a new
one.
13
[Before Use]
Remarks