Exporting Scl Files From Pcm600; Exporting Scd Files - ABB Relion 615 Series Engineering Manual

1MAC108982-MB A
7.3.1
7.3.1.1
615 series ANSI
Engineering Manual
1. SCL files are exported from PCM600. In this case, a SCD file. It is also possible
to export other SCL file types.
2. Horizontal and vertical communication is configured using the station
configuration tool, for example, CCT600.
3. SCL files are imported to a PCM600 project. In this case, it is the updated SCD file.
è
è
SCD file
è
è
è
è
PCM600 (1)
è do IED engineering
è export SCD file
IEC08000413 V1 EN
Figure 69: IEC 61850: signal engineering procedure flow when a complete station
is exported as a SCD file

Exporting SCL files from PCM600

A pre-condition for exporting SCL files from PCM600 is that all IEDs in the project
must be engineered in PCM600. The IEDs require unique name and IP addresses and
they must be set according to the project definitions. IED configurations must be
finalized as far as possible before starting the IEC 61850 configuration part.

Exporting SCD files

1. Select the station in the Plant Structure view.
IEC 61850 communication engineering
CCT600 (2)
create project
import SCD file
configure data sets
configure Report CBs
configure GOOSE CBs
export SCD file
è import SCD file
è link GOOSE input data
è Write to IED
IED 1 IED 2
Section 7
SCD file
PCM600 (3)
IED n-1 IED n
IEC08000413.vsd
103