Hmi Display Raster Layout And Text Font Selection; Text Handling; Adding Static Text - ABB Relion 615 Series Engineering Manual

1MAC108982-MB A
6.1.1.4
6.1.1.5
6.1.1.6
615 series ANSI
Engineering Manual

HMI display raster layout and text font selection

The raster on the page changes from symbol presentation to text presentation when a
text object is selected and vice versa.
The text can be presented in UniCode characters (6 x 12 pixel).
The total size of the presented white area (page) represents the visible part of the
LHMI display without the header line.
The visible display for a single-line diagram is organized in a raster of 9 x 7 (columns
x rows). Each symbol (presented in 15 x 15 pixels) included in the drag-and-drop
method must be dropped into a raster box.
The description text for an apparatus object can be placed in all four directions around
the symbol. The description is part of the apparatus object. It is possible to place the
symbols without the assistance of Snap to Grid and manually change the position
coordinates.

Text handling

The raster switches when text is selected in a raster of 22 x 9 (columns x rows). One
raster box is the placeholder for one character. A text element must be placed in the
position of the raster.
The name and the unit of a measurement or text symbol can be changed
by double-clicking the symbol or via the Object Properties view.
Selecting and toggling Show Texts using the IED fonts can be used to preview the single-
line diagram to see how it will be presented in the real HMI display.

Adding static text

1. Place a Static Text object into a raster box by dragging-and-dropping.
Section 6
LHMI engineering
89