1MAC108982-MB A
5.5.1
615 series ANSI
Engineering Manual
Opening and closing Fault Record tool
•
To open the Fault Record tool, click Fault Record Tool on the context menu of an
IED node inside the PCM600 project tree.
GUID-06441245-E6DA-4C9F-9363-26CE8D521CB2 V1 EN
Figure 57:
Opening the Fault Record tool
•
To close the Fault Record tool, click the Close button in the tool.
The Fault Record tool runs in the same process as PCM600 but in a separate
window. Multiple instances of the tool can be run at the same time. Any open tool
instances are closed without confirmation when PCM600 is closed.
Protection and control engineering
Section 5
83