1MAC108982-MB A
4.6.4
615 series ANSI
Engineering Manual
GUID-62DCC284-90D6-498A-A79A-25E884C61CC8-ANSI V1 EN
Figure 26:
PCM600: template information
4.
Check and verify the template information and click Close to close the window.
The Create New Object from Template dialog box is displayed.
5.
You can now delete, import or create a template by clicking the corresponding
button.
•
To delete the selected template, click Delete Template.
•
To import a template from the selection window, click Import Template.
•
To insert the selected IED to the bay, click Create.
It is possible to insert more than one IED from the Create New
Object from Template dialog box. The dialog box remains open
until you click Close.
6.
Click Close when you are finished.
Inserting an IED by importing a .pcmi file
It is possible to import a .pcmi file to create a new IED object in the plant structure.
Section 4
Setting up a project
45