Station Communication; Pcm600 - ABB REX610 Operation Manual

2NGA000823 A
3.4
3.5
REX610
Operation Manual
Event ID
6120
6130
5120
PCM600 Event Viewer can be used to view the audit trail events and process
related events. Audit trail events are visible through dedicated Security events
view. Since only the administrator has the right to read audit trail, authorization
must be used in PCM600. The audit trail cannot be reset, but PCM600 Event
Viewer can filter data.

Station communication

Operational information and controls are available through a wide range of
communication protocols including IEC 61850 and Modbus
capabilities, for example, horizontal communication between the relays, are only
enabled by IEC 61850.
The IEC 61850 protocol is a core part of the relay as the protection and control
application is fully based on standard modelling. The relay supports Edition 2
version of the standard. With Edition 2 support, the relay has the latest
functionality modelling for substation applications and the best interoperability for
modern substations.

PCM600

Protection and Control IED Manager PCM600 offers all the necessary functionality
to work throughout all stages of the protection relay's life cycle.
• Planning
• Engineering
• Commissioning
• Operation and disturbance handling
• Functional analysis
The whole substation configuration can be controlled and different tasks and
functions can be performed with the individual tool components. PCM600 can
operate with many different topologies, depending on the project needs.
For more information, see the PCM600 documentation.
Audit trail event
Test off
Control operation
Reset trips
Section 3
REX610 overview
Description
Test mode ended
Control operation performed successfully
Latched trips reset
®
. Full communication
23