Inserting An Ied In Offline Mode - ABB Relion 615 Series Engineering Manual

Section 4
Setting up a project
4.6.2
42
9. From the Plant structure view, check that PCM600 has turned online the IED
that was inserted to the bay level.
You cannot scan data from the IED or proceed further if the IED
is not online or if the IP address is not correct.

Inserting an IED in offline mode

When the physical IED is not available or not connected to PCM600, the engineering
is done without any synchronization with the IED. The offline configuration in
PCM600 can be synchronized with the physical IED later by connecting the IED to
PCM600.
Working in the offline mode has an advantage compared to online mode in that the
preparation for the configuration can be started even though the IED is not available.
1. In the Plant Structure view, right-click the bay and from the list that appears,
select New and the IED application area, for example, Feeder IEDs.
2. Select the IED type to be inserted.
You can also drag-and-drop an IED from the Object Types view
to the bay level.
The Configuration Mode Selection Page dialog box opens.
1MAC108982-MB A
615 series ANSI
Engineering Manual