1MAC108982-MB A
615 series ANSI
Engineering Manual
GUID-6A512EF8-5BDF-4B4A-A721-8152DB9D51A1 V1 EN
Figure 35:
Techical key information
3.
Click OK.
The technical key is read from the IED and the Set Technical Key dialog box opens.
GUID-177E6088-50E3-4A18-83E6-9777AEACB3C1 V1 EN
Figure 36:
Setting the technical key
4.
In Set Technical Key dialog box, select the techical key to be used. There are
three alternatives.
•
Use the existing technical key in the IED
•
Use the existing technical key defined for the IED object in PCM600
•
Set a user-defined technical key, which changes the technical key for both
the physical IED and IED object in PCM600
Section 4
Setting up a project
55