Section 4
Setting up a project
4.9
4.9.1
56
Do not use a technical key that has more than 10 characters.
5.
Click OK to confirm the selection.
It is not possible to set a user-defined name or select the
Technical key in IED if the value is the same as already given to
another IED object in the PCM600 project. In that kind of a
situation, a dialog box opens informing of the situation.
COM600 project
The 615 series connectivity package has support for SAB600. A 615 series IED is
imported as a 615 series device. It is also possible to import a full PCM600 project
including several 615 series devices to SAB600. In this case, PCM600 project
information is imported to SAB600 using a SCD file.
The 615 series device supports several functions in COM600.
•
Controlling the switchgear
•
Monitoring the measured values
•
Reading digital fault recordings
•
Setting parameters
Importing a 615 series IED in a COM600 project
1.
Create a PCM600 project including several 615 devices.
1MAC108982-MB A
615 series ANSI
Engineering Manual