1MAC108982-MB A
615 series ANSI
Engineering Manual
GUID-2A8CE4A6-1AA7-4129-A1B5-A739D4BCA4B7-ANSI V1 EN
Figure 24:
PCM600: Configuration Mode Selection Wizard
3.
Select Offline Configuration and click Next.
Setting up an IED in the offline mode is similar as in the online mode; however,
with offline mode it is not necessary to type the correct IP address in the
Communication port and IP address dialog box.
4.
On the order code selection page, make right order code selections.
5.
Click Generate to generate the functions for the selected order code.
A "Function generation complete." dialog box is shown. Click Close.
6.
Click Next on the Setup Complete Page that shows the summary of the IED
type, version, IP address and the selected order number.
7.
Click Finish to confirm the configuration and conduct the insertion.
Section 4
Setting up a project
43