Inserting An Ied - ABB Relion 615 Series Engineering Manual
Ansi
Hide thumbs
Also See for Relion 615 Series:
- Technical manual (1196 pages) ,
- Applications manual (220 pages) ,
- Operation manual (164 pages)
Table of Contents
Advertisement
1MAC108982-MB A
4.6
615 series ANSI
Engineering Manual
•
In the Plant Structure view, right-click and select New/ Create from
Template.
•
In the Plant Structure view, right-click and select New/ General and
select the element: either IED Group or Substation.
2.
On the menu bar, click View/ Object Types.
3.
Select the needed elements and drag-and-drop them into the plant structure.
GUID-E856B2E2-8200-46FC-AA98-878F70C20A96-ANSI V1 EN
Figure 15:
The start of a project with IEDs placed but not renamed
4.
Rename each level in the structure by the names/identifications used in the grid.
•
Right-click the level and select Rename.
•
Rename the levels in the Object Properties view.
Inserting an IED
The context menu or the Object Types view shows the available 615 series IEDs that
can be inserted, on the bay level, into the plant structure according to the installed
connectivity package.
It is possible to do various tasks in the plant structure.
Section 4
Setting up a project
33
Advertisement
Table of Contents
