Validation; Validation When Creating An Application Configuration - ABB Relion 615 Series Engineering Manual

Section 5
Protection and control engineering
5.1.8
5.1.8.1
72
GUID-40339889-3049-4C50-BA8F-8C3EB9A54C4D V1 EN
Figure 49: Application Configuration tool: HW signal channels
There are three types of supported hardware channels.
• Binary input channels
• Binary output channels
• Analog input channels
Hardware input channel can be used as often as needed. A hardware binary output
channel is taken from the list of available channels when a new channel is requested.
This prevents using the same hardware binary output channel twice.

Validation

Validation checks the application configuration for errors concerning the rules and
restrictions defined for making a MainApplication on three levels.
• During the logic creation, while making a connection or placing a function block
• On demand by starting the validation
• When writing the application configuration to the IED

Validation when creating an application configuration

Validation is made when creating the application configuration.
1MAC108982-MB A
615 series ANSI
Engineering Manual