ABB Relion 615 Series Engineering Manual page 85

1MAC108982-MB A
615 series ANSI
Engineering Manual
logic means inserting a logical gate (OR and AND blocks) between the function blocks
and the binary output channel. This can be engineered with the Signal Matrix tool.
A binary output channel can only be activated from one function block output. If it is
activated from more than one function block output, the glue logic has to be used.
Glue logic means inserting a logical gate (OR and AND blocks) between the function
blocks and the binary output channel. This can be engineered with the Signal Matrix tool.
Connections made with the Signal Matrix tool are automatically also
shown in the Application Configuration tool.
GUID-D0C99F05-64B1-487F-A713-3C9A495B27AC-ANSI V1 EN
Figure 52: Signal Matrix tool: a connection between binary input channels to
binary input signals
Depending on the IED capability, the Signal Matrix tool has a separate sheet for each
possible combination.
The possible sheets are:
Protection and control engineering
Section 5
77