Table of Contents
Advertisement
TRANSPORT POSITION
Fig. 6-1
In the transport position, the machine must be placed behind the tractor so that it
follows immediately behind the tractor. Standard and parallel chutes must point
backwards. Folding chutes must be folded down to rest on the stand on the drawbar.
The control box must be turned off to prevent the accidental operation of the
machine.
Fig. 6-2
Cylinder A on the drawbar may be adjusted in length to change the position of the
machine behind the tractor.
CAUTION:
PIGB-206B-02 FCT 1260-1460 0218
6. OPERATION IN THE FIELD
Fig. 6-1
Fig. 6-2
There must be a minimum of 20 mm in thread engagement between
the piston rod and threaded rod.
- 78 -
A
Advertisement
Table of Contents
