Table of Contents
Advertisement
ADJUSTMENT OF BELT GUIDE
Fig. 4-38 A belt guide has been fitted under the belts to drive the feed intake. The function of
the belt guide is to ensure that the feed intake comes to a standstill quicker when the
machine is put into neutral position. The machine must be in the feed intake position
when the distance A is adjusted, which must be 2-4 mm.
Fig. 4-39 If the cutting length is to be changed on the FCT 1260, the belt guide must be moved
by using the bushings A supplied.
PIGB-206B-02 FCT 1260-1460 0218
4. SETTINGS
Fig. 4-38
Fig. 4-39
A
- 69 -
Advertisement
Table of Contents
