FITTING CHUTES
There are 3 different chute options and 3 different positions of the bracket for chute
turning, in order to accommodate most needs.
NOTE. Not all machines offer the option for 3 positions of the bracket for chute
turning.
CHUTE TURNING
There are the following 3 positions for fitting the chute turning bracket, in order to
optimise unloading to a selected side.
Pos. 1
Fig. 3-8
Fig. 3-8
Pos. 1 for unloading to the right
Pos. 2 for unloading both sides. Cannot be used with the collapsible chute.
Pos. 3 for unloading to the left
When the chute is fitted, you must turn carefully from outer position to outer position
in order to ensure that the hydraulic hoses are fitted correctly and are long enough.
PIGB-206B-02 FCT 1260-1460 0218
3. COUPLING OF EQUIPMENT
Pos. 2
- 41 -
Pos. 3