Table of Contents
Advertisement
CONNECTING THE ELECTRICAL SYSTEM
Fig. 2-3
The machine is equipped for complete electronic operation of all the machine's
hydraulic functions. The electronic operation consists of two units:
A control unit mounted on the machine together with the hydraulic system.
This unit activates the hydraulic valves;
A control box for operation of the hydraulic functions. This can be beneficially
positioned on the right armrest of the tractor seat for easy access while
working in the field.
The control box is equipped with detachable fittings that can be permanently screwed
into the cab, allowing subsequent dismantling without the use of a tool.
The male connector for the power supply connects to a female connector inside the
tractor cab. This provides 12 V of power and allows a minimum current of 15 A.
Contact your dealer for an adapter if your tractor does not use the same connectors.
IMPORTANT:
PIGB-206B-02 FCT 1260-1460 0218
2. CONNECTING TO THE TRACTOR
Fig. 2-3
When parking, position the control box in such a way as to prevent
the ingress of water.
- 26 -
Advertisement
Table of Contents
