SPRING KIT
A spring kit in the stop system determines how quickly the feed intake stops in the
event of metal detection.
The spring kit must not be altered, as otherwise there is a risk of metal getting
to the blade rotor or the damaging effect of a shock impact on the
transmission.
Fig. 5-10 The spring kit is supplied from the factory and is prestressed to S = 175 mm.
FAULT FINDING FOR MD
Chapter 12 "MISCELLANEOUS" at the back of this manual contains a table for fault
finding on the MD system. The table contains the most common faults, possible
causes and remedies.
PIGB-206B-02 FCT 1260-1460 0218
5. METAL DETECTOR (MD)
Fig. 5-10
S
- 76 -