Displaying Software Version Information - Cisco GSS-4492R-K9 Administration Manual

Chapter 2 Managing the GSS from the CLI
Displaying GSS System Configuration Information

Displaying Software Version Information

You can display the software version information about the GSS software by using
the show version command. The syntax for the show version command is as
follows:
show version [verbose]
Specify the verbose optional keyword if you want to view detailed GSS software
version information.
To display general GSS software version information, enter:
gssm1.example.com# show version
Global Site Selector (GSS)
Model Number: GSS-4492-K9
Copyright (c) 1999-2007 by Cisco Systems, Inc.
Version 2.0 (1.0.0)
Uptime: 4 Hours 0 Minutes and 19 seconds
To display detailed GSS software version information, enter:
gssm1.example.com# show version verbose
Global Site Selector (GSS)
Model Number: GSS-4490-K9
Copyright (c) 1999-2003 by Cisco Systems, Inc.
Version 1.3(1)
Uptime: 23 Hours 57 Minutes and 53 seconds
Full Version: 1.3(1.0.0)
Compiled on Wed Feb 15 05:51:07 2006 by ralexand from gss-builder -
changeset 26190
Processor 0: Pentium III (Coppermine) GenuineIntel
Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev
08)
Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev
08)
IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Cisco Global Site Selector Administration Guide
2-45
OL-10410-01