Earth Clamp On Battery Negative Terminal; Red Clamp On Positive Terminal Of The Battery; Measuring The Timing - Kohler SFGLD480 Operation & Maintenance Manual

PRODUCT INFORMATION INDEX DATE
Dep. 2
IO-G-M-33-009e A
April 2013
CHECKING THE IGNITION TIMING
O&M_2.002211.810_A_10_2016
3. Connect earth to the negative terminal of the battery
Image 2 – Earth clamp on battery negative terminal
4. Start engine and go to the operating point chosen to measure the ignition timing.
5. Connect to the + terminal of the battery to make the strobe gun work.
Image 3 – Red clamp on positive terminal of the battery
6. It is normal to connect and disconnect so as not to drain the batteries.
7. Check with the timing gun in the flywheel window.
Image 4 – Measuring the timing
5.2.38
2/3