Fitting The Spark Plugs - Kohler SFGLD480 Operation & Maintenance Manual

1. FITTING THE SPARK PLUGS

This document describes the basic procedure for fitting spark plugs and connectors in conformity with the
criteria established by Kohler .
1. To prevent the formation of corrosion or sulphation, apply silicone grease onto the connectors and terminals,
which prevents moisture from getting in. Such types of grease include: Dow Corning DC-4, G.E. G-623 or GC
Electronics Z5. Also apply a small amount of grease onto the wire connector and coil.
2. You can measure and adjust the spark plug gap of some of the Kohler
Check the spark gap for each spark plug reference.
Measure the spark plug gap using thickness gauges.
-
Fig.1: Example: 0.3mm gap 1-electrode spark plug
2. In the case of four-electrode spark plugs, a special spark gap setting tool as shown in figure 3 ref. 19.75.016 is
used.
3. The tightening torque should be 4.8 Kgm.
PRODUCT INFORMATION
IM-G-C-33-001e
CONVENTIONAL SPARK PLUG INSTALLATION INSTRUCTIONS
0,3 mm.
5.2.31
INDEX
D
Fig.2: Example: 4-electrode spark plug.
Fig. 3
DATE
Dep.2
June 2013
O&M_2.002211.810_A_10_2016
-referenced spark plugs.
0,3 mm.
1/1