Kohler SFGLD480 Operation & Maintenance Manual page 70

ITEM
ENGINE BLOCK
Bearing cap fixing stud
Bearing cap nut (See IM-C-C-10-001e)
Bearing cap cross bolt (See IM-C-C-10-001e)
Cylinder head stud to crankcase (with Loctite 511)
MOVING PARTS
Counterweight to crankshaft capscrew
Vibration damper capscrew
Connecting rod capscrew (See IM-C-C-15-002e)
Crankshaft rear output flange capscrew (flywheel)
Flywheel capscrew
CYLINDER HEAD
Cylinder head nut
Spark plug sleeve
Rocker arm adjusting screw
Valve lifter adjusting screw
SPARK PLUG (See IO-G-M-33-001, IO-G-M-33-004, IO-G-M-33-007)
DISTRIBUTION
Oil pump gear fixing nut (with Loctite 243)
OTHERS
Nut for water pump impeller, main & auxiliary circuits (with
Loctite 243)
Water pump gear drive and bearing capscrew, main &
auxiliary circuits (with Loctite 243)
Engine to skid / subbase capscrew (M.20)
Exhaust manifold to cylinder head capscrew
Turbocharger to manifold nut
NOTE
General directive for tightening torques based on screw quality and diameter.
These values should be used unless expressly specified otherwise. See IM-C-C-00-002e.
PRODUCT INFORMATION
IM-G-C-00-001e
TIGHTENING TORQUES FOR GAS AND ETHANOL ENGINES
HGM 420 / 560
* Oil lubricated (with plenty of motor oil)
2.1.35
INDEX
F
January 2015
REFERENCE
--
DATE
Dep. 1
O&M_2.002211.810_A_10_2016
TIGHTENING TORQUE
Kgm. Nm.
10* 98*
102* 1001*
28* 275*
5 49
28,5* 280*
14 137
50* 491*
43* 421*
31* 304*
48* 441*
23 226
10 98
4,5 44
35 343
10 10 98
18 177
18 177
33 324
4,5 44
4,5 44
98
3/3