Kohler SFGLD480 Operation & Maintenance Manual page 68

ENGINE BLOCK
Bearing capscrew (See IM-C-C-10-001e)
Bearing cap cross bolt (See IM-C-C-10-001e)
Cylinder head stud to crankcase (with Loctite 511)
MOVING PARTS
Counterweight to crankshaft capscrew
Connecting rod capscrew (See IM-C-C-15-002e)
Flywheel mounting capscrew (with Loctite 243)
Screws crankshaft companion flange front (with Loctite
243)
Vibration damper capscrew
CYLINDER HEAD
Cylinder head nut (See IM-C-C-10-002e)
Spark plug sleeve
Rocker arm adjusting screw
Valve lifter adjusting screw
SPARK PLUG (See IO-G-M-33-001, IO-G-M-33-004, IO-G-M-33-007)
DISTRIBUTION
Oil pump gear fixing nut (with Loctite 243)
OTHERS
Nut for water pump impeller, main circuit
(with Loctite 243)
Water pump gear drive and bearing capscrew, main circuit
(with Loctite 243)
Engine to skid / subbase capscrew (M.20)
Exhaust manifold to cylinder head capscrew
Turbocharger to manifold nut
NOTE
General directive for tightening torques based on screw quality and diameter.
These values should be used unless expressly specified otherwise. See IM-C-C-00-002e.
PRODUCT INFORMATION
IM-G-C-00-001e
TIGHTENING TORQUES FOR GAS AND ETHANOL ENGINES
ITEM
* Oil lubricated (with plenty of motor oil)
INDEX
F
In line 180/240
REFERENCE
--
Wet / Dry
2.1.33
DATE
Dep. 1
January 2015
O&M_2.002211.810_A_10_2016
TIGHTENING TORQUE
Kgm. Nm.
82* 804*
13* 128*
5 49
28.5* 280*
50* 491*
36 353
16 157
16
14 137
48* 471*
23 226
10 98
4.5 44
30 294
10 98
10
10 98
33 324
6 / 4,5 59 / 44
8.3 / 4,5 81 / 44
4,5 / 4,5 44 / 44
157
98
1/3