Table of Contents
Advertisement
2
Nickel
Aluminium
Magnesium
Sodium
Potassium
Freezing point
2.6 Coolant recommendation
A mixture of 50% demineralized water and 50% low silicate ethylene glycol based coolant liquid must be used. Use a
Long Life or Extended Life Heavy Duty OAT coolant free of: silicates, phosphates, borates, nitrites and amines.
The following ethylene-glycol based engine coolant for all models within KDI engine family may be used:
•
OAT (Organic Acid Technology) Low Silicate: ASTM D-3306 D-6210
•
HOAT (Hybrid Organic Acid Technology) Low Silicate: ASTM D-3306 D-6210
The above coolants in concentrated formulation must be mixed with distilled, deionized, or demineralized water. A
pre-mixed formulation (40-60% or 50-50%) can be used directly when available.
Important
•
Do not mix ethylene glycol and propylene glycol based coolants. Do not mix OAT and HOAT based coolant.
OAT performance life can be drastically reduced if contaminated with nitrite-containing coolants.
•
Never use automotive-type coolants. These coolants do not contain the correct additives to protect heavy –
duty diesel engines.
OAT coolants are maintenance free up to 6 years or 6000hrs of operation , provided that the cooling system is topped
up using the same type of coolant. Do not mix different coolant types. Test the coolant condition annually with coolant
test strips.
HOAT are not all maintenance free and it is recommended to have SCA (Supplemental Coolant Additives) added at
the first maintenance interval.
2.7 Battery recommendation
Battery not supplied by Kohler
2.6
AMBIENT
TEMPERATURE
≥ - 25°C
≥ - 25°C
EN
22
TECHNICAL INFORMATION
mg/kg
mg/kg
mg/kg
mg/kg
mg/kg
°C
RECOMMENDED BATTERIES
STARTER
OIL
MOTOR
3.2kW +
10W-
HEATER
40
5W-40
4.2kW +
HEATER
BATTERY TYPE
light hydraulic parasitic loads or
880CCA SAE
mechanical clutch and gearbox
(=1000 A (EN))
heavy hydraulic parasitic loads
1000CCA SAE
=(1250 A (EN))
< 0,2
< 0,5
< 0,5
< 0,5
< 0,5
11
MACHINE CONDITION
Advertisement
Table of Contents
