Reading Parameters; Timing - Kohler SFGLD480 Operation & Maintenance Manual

3.1. READING PARAMETERS

The following briefly explains each of the screen views where data is displayed on the ignition unit:
3.1.1. Overview
This view shows global operating parameters
- Pick up: the green status display indicates that pickup signals are being recorded (engine running). If no
signal is detected, the LED remains grey.
- Ignition Output: we get different information on the ignition outputs depending on the colour:Grey: the
firing is not active
Green: There are no misfires. Everything is working correctly.
o
Yellow: There were previously misfires, but currently there are no more misfires.
o
Red: There are misfires.
o
Further details on the information this led provides can be found in the Ignition view.
- Ignition Enabled: This LED indicates whether the ignition unit has received a spark enabled command or
not.
Grey: the firing is not activated
o
Green. The firing is activated
o
- System: this LED displays the system status. Equivalent to Status LED on the front of the ignition unit:
Grey: the display is not communicating with the ignition unit (the ignition unit is not powered on,
o
the unit-screen communication is not working...)
Green: the ignition unit is recording no errors.
o
Yellow. The ignition unit is giving warnings/alerts (which do not lead to stopping the unit)
o
Red: There are errors, which lead to shut down.
o
- Speed: the pointer shows the engine speed.
- Ignition Time: shows the global timing of the engine.
3.1.2.

Timing

This view provides information on how to calculate the ignition timing the engine operates on.
PRODUCT INFORMATION
IO-G-M-33-010e
INSTALLATION AND OPERATION MANUAL - GIS IGNITION UNIT
Fig. 7 – Menu Overview
4.1.30
INDEX DATE
June 2013
DISPLAY
O&M_2.002211.810_A_10_2016
Dep. 2
6/14