Table of Contents
Advertisement
Extended telephone functions
or deactivated via programming. This function can only be used if the caller's
number is being trans ferred. You have either the option to activate the list
of released numbers for ringing signals or the list of restricted numbers for
ringing signals. If you set none of the two functions, the ringing signal works
according to the standard. See page 24 of the programming instruc tions.
Ringing melody
Your telephone provides 10 different ringing melodies. See page 25 of the
programming instructions.
Incoming call indication by flashlight
There is the option to have an additional indication of an incoming call by
flashlight. The flashlight is emitted at the rear of the display. If this function is
activated, the display will show a „flash symbol". The flashlight is activated in
factory pre-set. See page 25 of the pro gram ming instructions.
Display lightness adjustment
The telephone offers the option to adjust the display lightness.See program-
ming instructions as of page 37.
Call restriction
Apart from the direct call function, there are two other options for „call restric-
tions":
a)
Full restriction: It is not possible to dial telephone numbers and to
establish calls (except for the stored emergency numbers for police
and fire-brigade and the programmed SOS numbers as far as the
emergency call function is active). You can identify a programmed full
restriction via the display.
27
Advertisement
Table of Contents
