Figure 4-21: Device Properties Dialog - S/W Upgrade Tab - Harmonic ProView 7000 User Manual

Chapter 4 Element Management System (EMS)
NOTE: The factory default passwords are:
User: configure – configure
■
User: monitor – monitor
■
Only a Configure user can change the passwords.
It is warmly recommended to change the passwords once the device is installed to prevent unwanted
tamper with the device.
Resetting the password of the device requires restoring the factory access passwords. For details, see
4.3.3.9 Restoring the Factory/Default Device Access
4.5.1.5 Device Software Upgrade Properties
The ProView 7000 device software can be upgraded using non EMS managed tools, consisting
of BOOTP and TFTP industry standard tools.
The S/W Upgrade tab sets the number of retries for each one of these two upgrade tools.
The EMS enables the user to view and switch between the current and last software version
for the device. This feature is very useful when the user selects to return to the last software
version after a software upgrade. For details, refer see
EMS provides a Software Upgrade Manager tool. For details, see
Manager.
© 2011 Harmonic Inc.
Figure 4–21: Device Properties dialog – S/W Upgrade tab
91
Element Properties Configuration
Passwords.
E.1 Active Version
E.2 Software Upgrade
Management. The
ProView 7000 v.2.4, Rev. A