Figure 4-38: Decoding Channel Properties - Video Tab - Harmonic ProView 7000 User Manual

Chapter 4 Element Management System (EMS)
The video output set-up depends on the display format selected:
Standard Definition (SD) Digital and Analog Output parameters:
Video Format – selects the video format.
■
Options:
NTSC
❑
PAL-B/G, -I, -D, -M, -N
❑
French SECAM – The CV monitor output—outputs Russian SECAM as French SECAM.
❑
Aspect Ratio Conversion – selects the aspect ratio conversion for the output stream. To be
■
performed if the incoming stream aspect ratio is not the same as the configured output
aspect ratio.
Options (related to selected aspect ratio):
4:3 Aspect ratio: Center-cut, Letterbox, Full Screen, AFD
❑
16:9 Aspect ratio: Pillarbox (Side-bars), Center-cut, Full Screen, AFD
❑
Aspect ratio – selects the aspect ratio.
■
Options:
4:3
❑
16:9
❑
Pass Through
❑
© 2011 Harmonic Inc.
Figure 4–38: Decoding Channel Properties – Video tab
119
Element Properties Configuration
ProView 7000 v.2.4, Rev. A