Harmonic ProView 7000 User Manual page 73

Chapter 4 Element Management System (EMS)
4.4.3.1 Multiplex Output
Right-click a Multiplex Output icon (
which comprises the following:
Table 4–11: Multiplex Output Context Menu
Disable/
Add Other Program...
Add Unreferenced PID...
Remove Selected
Remove All
Refresh
Properties
© 2011 Harmonic Inc.
) or any of the sub elements to display a context menu
A dynamic command, changing according to the multiplex output
Enable
operational status.
Enables adding a program from the multiplex input to the multiplex output
programs.
NOTE: Not available when the device is configured to pass-through the
input stream to the output port.
Enables adding a specific PID from the multiplex input to the multiplex
output unreferenced PIDs.
NOTE: Not available when the device is configured to pass-through the
input stream to the output port.
Removes the selected element.
Removes all output programs or all output unreferenced PID from the
multiplex output.
Updates the EMS screen. For details, see
Screen.
Displays the marked element properties dialog. For details, see
4.5.4 Multiplex & Decoding Output
73
Device Explorer
4.7 Refreshing the EMS
Properties.
ProView 7000 v.2.4, Rev. A