Harmonic ProView 7000 User Manual page 35

Chapter 3 Configuration and Monitoring
c If the GbE mode is configured as In in the Set GbE Mode dialog, configure it to Out
and click
The device reboots.
d Expand the device tree in the Physical Output box to reveal the GbE ports.
e Select the required GbE port icon in the Physical Output box.
f Click
g Configure the GbE port, see
h Select a socket in the GbE branch in the Physical Output box.
i Click
j Configure the socket, see
4. To associate a multiplex in port to a CAM Slot:
a Select the required CAM Slot name in the Physical Input box.
b Click
The dialog displays with the programs descrambled by the slot.
c Select a multiplex in port to connect to the CAM slot.
5. To descramble a program:
a Right-click a program in the Multiplex & Decoding Output box.
b Select
The Program Properties dialog displays.
c Mark the
d Select a CAM slot.
e Click
© 2011 Harmonic Inc.
.
OK
on the EMS toolbar.
Properties
4.5.5.2 GbE Ports
on the EMS toolbar.
Properties
GbE Socket Properties (Output Mode)
on the EMS toolbar.
Properties
.
Properties
checkbox.
Descramble with
.
Apply
How to Configure and Monitor the ProView 7000
for details.
35
for details.
ProView 7000 v.2.4, Rev. A