Unit Menu - Harmonic ProView 7000 User Manual

Chapter 5 Front Panel Interface
5.2.7.4 Configuring Only Relevant Elementary Streams
The descrambling mode default is Selective.
To set the CAM to Selective mode to configure only relevant elementary streams:
1. Navigate
2. Select
Full
5.2.7.5 Accessing the CAM MMI Menu
To access the CAM MMI menu:
❖ Navigate
5.2.8

Unit Menu

The Unit main menu enables monitoring and setting-up ProView 7000 device features.
To access the Unit main menu:
❖ Navigate
1 Management Port
2 SW Version
3 HW Inventory
4 Date/Time
5 GbE Mode (In/Out)
6 BOOTP
7 LCD Contrast
8 Reset Unit
9 Restore to Defaults
The ProView 7000 Unit menu provides access to the following sub-menus and set-up options:
Management Port sub-menu – sets the device management port parameters (for details,
■
see 5.2.8.1 Management Port
SW Version sub-menu – displays the current version of the ProView 7000 software.
■
HW Inventory sub-menu – displays the parameters of the hardware modules installed in
■
the ProView 7000 (for details, see
Date/Time – You can set the current date and time using the front panel. See
■
Time Menu.
GbE Mode (In/Out) – Set the GbE mode, see
■
BOOTP – enables running BOOTP software updating on the unit.
■
© 2011 Harmonic Inc.
Root > CAM > CAM (1 or 2) > 2 Descrambling Mode
.
Root > CAM > CAM (1 or 2) > 3 CAM MMI
.
Root > Unit
Unit
Configuration).
.
5.2.8.2 Hardware Inventory Display
5.2.8.4 GbE Mode
172
Front Panel Root Menu
.
IP Out
Disable
Reset
Restore to Defaults
Menu).
5.2.8.3 Date/
(In/Out).
ProView 7000 v.2.4, Rev. A
31