Gbe Menu - Harmonic ProView 7000 User Manual

Chapter 5 Front Panel Interface
SAT 3
❑
SAT 4
❑
ASI 1
❑
ASI 2
❑
ASI 3
❑
ASI 4
❑
Socket 1
❑
Socket 2
❑
Socket 3
❑
Socket 4
❑
None
❑
Input Type – Use this menu to select the input type MPEG or DVB.
■
Output Selection – Use this menu to individually enable or disable the following physical
■
outputs:
ASI 1
❑
ASI 2
❑
Socket 1
❑
Socket 2
❑
Socket 3
❑
Socket 4
❑
Descrambling – Select a program then select one of the following CAM slots:
■
CAM 1
❑
CAM 2
❑
None
❑
5.2.4

GbE Menu

The GbE menu has the following sub-menus:
Active Port – Use this menu to select the active port when the mode is set to In. The
■
default is port 1.
GbE Port 1/2 – Use these menus to configure the following:
■
IP Configuration – Use this menu to configure the following:
❑
• IP Address – The default is 127.127.0.X (X is the port number). Each port must have a
unique IP address.
• Subnet Mask – The default is 255.255.255.0.
• Gateway – Output mode only. The default is 127.127.0.1.
MAC Address – Use this menu to view the MAC address for this port.
❑
2. The number of RF satellite inputs depends on your hardware configuration.
© 2011 Harmonic Inc. 167
Front Panel Root Menu
ProView 7000 v.2.4, Rev. A