Figure 4-30: Cam Card Properties Dialog - Harmonic ProView 7000 User Manual

Chapter 4 Element Management System (EMS)
Descrambled Programs – Displays the program PIDs descrambled by the CAM.
■
CAM Automatic Recovery Policy – You can configure the ProView 7000 to reset the CAM
■
when one of the following alarms is raised:
CAM Descrambling Failure – Enabled by default.
❑
CAM Processing Failure – Enabled by default.
❑
Packet Loss after CAM – Disabled by default.
❑
4.5.2.5 CAM Card Properties
The CAM Card Properties dialog displays the properties of the selected CAM Card element.
To display the CAM Card properties information:
1. Select the required CAM Card icon in the Input Physical box on the Device Explorer tab.
2. Click Properties on the EMS toolbar.
The information displayed by the CAM Card Properties dialog includes the following:
CAM card application type
■
Card manufacturer name, number and code
■
Conditional Access System ID
■
Card operational status
■
Number of descrambled programs and elementary streams
■
© 2011 Harmonic Inc.
Figure 4–30: CAM Card properties dialog
104
Element Properties Configuration
ProView 7000 v.2.4, Rev. A