Harmonic ProView 7000 User Manual page 157

Chapter 5 Front Panel Interface
5.2.2.1 ProView 7000 Decoding Configuration
To access the Decoding Configuration menu:
❖ Navigate
Service Selection Mode
Input Selection
Programs
Descrambling
Video
PCR
Audio1
Audio2
VBI
The Decoding Configuration menu provides the following options:
Service Selection Mode – (for details see
■
Input Selection – Select the transport stream (1–4).
■
Programs – displays a list of the programs available at the multiplexed input and select the
■
program to be decoded. The screen provides the program name (if the input stream
provides the SDT table), program identification (decimal number of the program number),
the program type (TV or Radio) and the program mode (CAS/scrambled or FTA/free).
Selecting a program, deselect the previous one (radio buttons selection).
Descrambling – selects the descrambling device for the modulated program.
■
Options CAM 1, CAM 2 or None (radio buttons selection).
Video – sets-up the video modulation parameters, depending on the video codecs and
■
format (for details, see
PCR – selects the clock source for the decoded program and sets-up the a/v sync
■
parameters (for details, see
Audio1/2 – sets-up the audio decoding parameters for each one of the two audio channels
■
in the program (for details, see
VBI – sets-up the VBI/VANC parameters for the various program related functions (for
■
details, see
TIP: The ProView 7000 decoding management is equally performed using the EMS.
Refer to 4.5.4.7 Decoding Channel Properties
© 2011 Harmonic Inc.
Root > 2 Decoding > 1 Configuration
Configuration
5.2.2.4 Video Configuration
5.2.2.5 PCR Configuration
5.2.2.6 Audio 1 / 2 Configuration
5.2.2.7 VBI Configuration
.
5.2.2.3 Service Selection Mode
Menu).
Menu).
Menu).
for details.
157
Front Panel Root Menu
Program selection
Menu)
Menu).
ProView 7000 v.2.4, Rev. A