Figure 4-33: Transport Stream Port Route Properties Dialog - Harmonic ProView 7000 User Manual

Chapter 4 Element Management System (EMS)
4.5.4.2 Transport Stream Port Route Properties dialog
The Transport Stream Port Route Properties dialog displays the current status of a transport
stream routed to an output port.
To display the Transport Stream Port Route Properties dialog:
1. Select the TS port route icon in the Multiplex & Decoding Output box on the Device
Explorer tab.
2. Click
Properties
The information provided by the Transport Stream Port Route Properties dialog includes the
following:
Enabled – Enables (Yes/No) the output port operation.
■
Input Port – Displays the multiplex input port name.
■
Transport Stream ID – Displays the transport stream ID number.
■
Output Port – Displays the stream output port name.
■
© 2011 Harmonic Inc.
on the EMS toolbar.
Figure 4–33: Transport Stream Port Route Properties dialog
111
Element Properties Configuration
ProView 7000 v.2.4, Rev. A