Switching On; Figure 2-3: Front Panel Startup Display - Harmonic ProView 7000 User Manual

Chapter 2 Hardware Installation
2.8

Switching On

Before switching the ProView 7000 on, make sure that all cables are correctly connected.
Ensure that the unit is connected to the main power supply and correctly grounded.
❖ Switch the unit on with the rear power switch.
Once the boot process is completed (after 2-3 minutes) the Status OK message displays
on the front panel LCD.
© 2011 Harmonic Inc.
Status OK
Figure 2–3: Front Panel startup display
No Service Selected
23
Switching On
ProView 7000 v.2.4, Rev. A